- Technical specs
Part number | Variation name | Outside diameter in millimetres | Bend radius in millimetres | Burst pressure in bar | Maximum gauge pressure in bar | Burst pressure | Vacuum level in inches of mercury | Thread size | Thread size in millimetres | Thread size in UNF | Size of inlet thread | Size of outlet thread | To suit internal diameter of hose | To suit metric internal diameter of hose | To suit metric outside | Flange size | Seal Type | Working temp | Output Signal mA | Litres per Minute | Mpa Working pressure | Micron Rating for filtration | To Suit | Notes | Length MM | Hole Centres in mm | Height in MM | Port Size | Oem Code | Element Media | Old Ref | Material | Model | Box QTY | Bypass in PSIG | Float Material | Flow rate in cubic | Litres per second | ElemnentSize | Voltage | Max Litres per Minute | Wattage | OD In INCHES | Max working pressure | Size | Max Pressure for rotation | Displacement cm3758 | Volume | Function | To suit Cartridge | Ratio | No. of Stations | Type | Frame Size | Group Number |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
PS-06-07 | SAE Inverted Flare x JIC Male | 3/8” | |||||||||||||||||||||||||||||||||||||||||||||||||||||
PS-07-07 | SAE Inverted Flare x JIC Male | 7/16” | |||||||||||||||||||||||||||||||||||||||||||||||||||||
PS-08-08 | SAE Inverted Flare x JIC Male | 1/2” | |||||||||||||||||||||||||||||||||||||||||||||||||||||
PS-08-09 | SAE Inverted Flare x JIC Male | 1/2” | |||||||||||||||||||||||||||||||||||||||||||||||||||||
PS-08-10 | SAE Inverted Flare x JIC Male | 1/2” | |||||||||||||||||||||||||||||||||||||||||||||||||||||
PS-10-09 | SAE Inverted Flare x JIC Male | 5/8” | |||||||||||||||||||||||||||||||||||||||||||||||||||||
PS-10-10 | SAE Inverted Flare x JIC Male | 5/8” | |||||||||||||||||||||||||||||||||||||||||||||||||||||
PS-10-12 | SAE Inverted Flare x JIC Male | 5/8” | |||||||||||||||||||||||||||||||||||||||||||||||||||||
PS-11-12 | SAE Inverted Flare x JIC Male | 11/16” | |||||||||||||||||||||||||||||||||||||||||||||||||||||
PS-12-12 | SAE Inverted Flare x JIC Male | 3/4” |
Select a country